WELCOME GOLFERS!!

THIS IS THE WORLDS #1 GOLF GROOVE SHARPENER AND IT NOW HAS A HANDLE THAT MAKES REGROOVING YOU IRONS AND WEDGES EASIER THAN ANY OTHER REGROOVING TOOL ON THE MARKET--GUARANTEED!!! DON'T BE FOOLED BY A CHEAP KNOCKOFF IMITATION GROOVE SHARPENER WITHOUT THE HANDLE.

INDEPENDENT TESTS SHOW THAT AFTER 100 SHOTS WEDGES AND IRONS START LOSING THE SHARPNESS OF THE GROOVES.

THIS GROOVE SHARPENER WILL WORK ON ANY BRAND OF IRONS OR WEDGES!!

MANY OTHER GROOVE SHARPENER SELLERS CLAIM THEY HAVE A BETTER GROOVE SHARPENER BUT THE FACT IS THEY MOST LIKELY PURCHASED THIS TOOL AND MADE A KNOCKOFF OF THEIR OWN WITHOUT THE RESEARCH AND DEVELOPMENT IT TAKES TO PRODUCE A HIGH QUALITY GROOVE SHARPENER. JUST LOOK AT HOW EFFECTIVE THE TOOL IS IN THE PICTURES. NO OTHER SELLER SHOWS PICTURES OF THEIR TOOL IN ACTION BECAUSE THIS TOOL IS THE BEST!

THROUGH HUNDREDS OF TESTS OF TRIAL AND ERROR I PERSONALLY HELPED SHAPE AND DESIGN THE GROOVE SHARPENER TO THE FINE TOOL IT IS TODAY. AS AN AMETUER GOLFER MYSELF, I WANTED TO MAKE THE BALL SPIN MORE LIKE THE PROS FOR BETTER GREENSIDE CONTROL, SO MY FRIEND WHO OWNS A HIGH TECH TOOL MANUFACTURING SHOP MADE THE TOOL AND PERFORMED MANY TESTS ON CLUBS OF EVERY MAKE AND MODEL. OUR GOAL WAS TO MAKE A UNIVERSAL TOOL THAT WOULD WORK ON ANY IRON OR WEDGE WHETHER IT WAS U GROOVE IRONS OR V GROOVE IRONS, SQUARE GROOVE OR BOX GROOVE. WHILE OTHER TOOLS ONLY HAVE ONE SIDE, THE GROOVE SHARPENER HAS TWO DIFFERENT SIDES - ONE FOR U GROOVES AND ONE FOR V GROOVES...... WHICH IS WHY YOU SHOULD BUY A GROOVE SHARPENER FROM A GROOVE SHARPENER STORE - BECAUSE WE KNOW GROOVE SHARPENERS!!!

I HAVE USED THIS ON U & V GROOVES ON ALL MAKES OF IRONS AND WEDGES. THIS TOOL WILL WORK ON ANY IRON OR WEDGE OF ANY MAKE OR MODEL.

WE AT "THE GROOVE SHARPENER" ARE CONSTANTLY TRYING TO IMPROVE THE TOOL IN ANY WAY POSSIBLE TO MAKE IT NOT ONLY WORK BETTER BUT TO BE EASIER FOR YOU TO USE IT.

CHECK OUT ALL THE METAL SHAVINGS THE GROOVE SHARPENER PULLS OUT OF THE GROOVES IN THE PICTURE

IT SHARPENS YOUR IRONS AND WEDGES AND CUTS THE GROOVES DEEPER AT THE SAME TIME!!!

The GROOVE SHARPENERis made of heat treated tool steel (A-2) which measures a hardness of 64 Rockwell. Because the tool is so hard it will notloose its cutting edge like other groove tools. The GROOVE SHARPENERis designed to remove metal from the side of the groove which produces the sharp edge.

GROOVE SHARPENERcan be used on either end. It has two different cuttings sizes one size has a square end that measures .020 of a inch and the other side is has a V shape groove . You can cut a Squaregroove or a V shaped groove.Instructions on how to use the tool will be sent with the tool.